- ページ 6

音楽機材 AC Guitars EQ-02のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AC Guitars EQ-02 6 ページ。 Filter-based system

FILTER-BASED EQ-02 SYSTEM

INSTRUCTION MANUAL

CONNECTING THE POTS

The EQ02 preamp should have the individual Volume (marked V) and Blend (marked B) pots already

connected to the circuit board, via their triple wires and plugs. If for any reason they are not connected,

insert their plugs into respective sockets, making sure orientation is correct.

COMMENTS

•

Flat flexi-strips are designed to be formed and readily bendable, but try to keep this to a minimum

without any sharp corners.

•

Important: Make sure all threaded bushes for the pots are solidly grounded via screening or other highly

conductive material. (Although conductive paint is fine for screening it should not be used as a method

for grounding the pots of the pre-amp)

•

The additional black wire should be attached to the cavity ground.

•

The pre-amp can be powered by 9 or 18 volts.

www.acguitars.co.uk

07754 502 366