AC Guitars EQ-02 Manual de instruções - Página 6
Procurar online ou descarregar pdf Manual de instruções para Equipamento de música AC Guitars EQ-02. AC Guitars EQ-02 6 páginas. Filter-based system
Imprimir páginaFILTER-BASED EQ-02 SYSTEM
INSTRUCTION MANUAL
CONNECTING THE POTS
The EQ02 preamp should have the individual Volume (marked V) and Blend (marked B) pots already
connected to the circuit board, via their triple wires and plugs. If for any reason they are not connected,
insert their plugs into respective sockets, making sure orientation is correct.
COMMENTS
•
Flat flexi-strips are designed to be formed and readily bendable, but try to keep this to a minimum
without any sharp corners.
•
Important: Make sure all threaded bushes for the pots are solidly grounded via screening or other highly
conductive material. (Although conductive paint is fine for screening it should not be used as a method
for grounding the pots of the pre-amp)
•
The additional black wire should be attached to the cavity ground.
•
The pre-amp can be powered by 9 or 18 volts.
www.acguitars.co.uk
07754 502 366