- ページ 20

オーブン AEG 30" DEO76のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AEG 30" DEO76 33 ページ。 30” built-in double oven
AEG 30" DEO76 にも：ユーザーマニュアル (13 ページ)

For Double Oven re-fit the bottom door first by fixing the hinges with their screws; fix also

the bracket of the middle spacer profile at the same time

Re-fit the top door after having rotated it by 180°

Re-fit the two door catches in the appropriate oven front frame position – minor adjustment

available later to ensure accurate receipt of door striker pin

10.

Re-fit the remaining screws in the thread holes in the oven front frame

The changeover is complete – please check that all screws are fully tightened and that the striker

pin is accurately received by the re-located door latch.

Changing the light globe

The light globe is located behind the glass cover and is a screw-in type.

To change a light globe:

1- Gently lever out the glass cover only.

2- Pull the light globe and push in a replacement globe.

3- Replace the glass cover making sure it fits correctly into place.

NOTE:

Recommended globe: Halogen 40W

G -

Trouble Shooting Guide

Symptom

No power supplied to appliance

Oven power is on but appliance does not

operate

Oven power is on but there is no heat

Rubber seal has gap/s at bottom and

ends do not meet

Display is flashing, is only part

illuminated or is cycling through various

displays.

Remedy

Has the power been disconnected? Check the meter

box. Has the main fuse or circuit breaker blown or

tripped?

Oven may be set on AUTO (see auto programmed

cooking)

Oven may be set on AUTO

Oven temperature may be set OFF

Mode may be on incorrect selection

Correct - doors are sealed this way for oven venting

purposes

Turn power supply to appliance off, wait 30 seconds and

turn power on. Reset clock