- ページ 6
オーブン AEG 30" DEO76のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AEG 30" DEO76 33 ページ。 30” built-in double oven
AEG 30" DEO76 にも: ユーザーマニュアル (13 ページ)
- 1. Table of Contents
- 2. A - Installation Check and Warnings
- 3. B - Accessories
- 4. C - Using the Appliance for the First Time
- 5. D - Electronic Programmer Operation
- 6. E - Cooking Modes and Instructions
- 7. F - Cleaning and Maintenance
- 8. G - Trouble Shooting Guide
- 9. H - Installation Instructions
- 10. I - Electrical Wiring Diagrams and Instructions
- 11. Warranty
D -
Electronic Programmer Operation
The 24 hour clock allows the setting of automatic cooking options up to 24 hours in advance.
-
1
Minus Time Button
2
Mode (Countdown Timer with Alarm, Cooking duration, End Time)
+
3
Plus Time Button
IMPORTANT – NOTE FOR NEW INSTALLATION AND FIRST OPERATION
Setting the time on the 24 hour clock
1- The clock will require setting when you first turn on the power (or following a power failure).
2- At power on, the relay contact is opened. The display and AUTO symbol flashes and time of
day starts from 0:00.
3- Press PLUS and MINUS button simultaneously for minimum 3 seconds. The AUTO symbol
goes out, POT symbol
advance slowly, and then speed up. If you over-shoot the desired time , use the MINUS button)
4- Press the MODE button twice to display the time of day. The oven will be in manual cooking
mode, with POT symbol
5- The oven is now ready for use and to accept the selected cooking functions
Setting the timer
6- The timer can be set for countdown up to 24 hours and for automatic cooking modes up to 10
hours and will countdown to zero. When zero is reached the alarm will sound.
To set the countdown timer, press the MODE button for minimum 3 seconds. The
7-
BELL symbol is flashing and the display shows 0:00. Using the PLUS button advance
the timer to the desired time.
8- Once the countdown timer is set, the normal time of day will return to the display within 7
seconds. If you wish to check how much time remains on the countdown, press the MODE
button for 3 seconds. The remaining time will be displayed. After 7 seconds the normal time will
return to the display.
9- To silence the alarm press the MODE button for minimum 4 seconds.
goes on, the DOT is flashing. With the PLUS button the time will
displayed.
6