- ページ 2

GPS Garmin zumo 665LMのPDF インストレーション・インストラクションをオンラインで閲覧またはダウンロードできます。Garmin zumo 665LM 4 ページ。
Garmin zumo 665LM にも：クイック・スタート・マニュアル (8 ページ)

Option B: Installing the Handlebar Base to the Clutch/Brake Clamp Bracket:

Incorrectly installing the handlebar base to the clutch/brake bracket can cause brake or clutch

malfunction, which can result in damage to the vehicle and the risk of personal injury or death.

Garmin strongly recommends having an experienced installer with the proper knowledge of

clutch/brake systems install the unit.

Note: Both 1/4 in. standard and M6 bolts are included. Match the size of the factory bolts on

your clutch/brake clamp bracket.

1. Remove the two factory bolts on your clutch/brake clamp bracket.

2. Thread the new bolts through the handlebar base, spacers, and clamp bracket.

3. Tighten the bolts to secure the base.

Step 3: attaching the Base Plate to the zūmo Mount

1. Thread the M4 × 40 mm panhead screws through the washers, cradle, spacers, and base

plate.

2. Tighten the nuts to secure the base plate.

Panhead screws

Step 4: attaching the Base Plate to the Handlebar Base

1. Align the ball of the handlebar base and the ball of the base plate with the double-socket

arm.

2. Tighten the knob slightly.

3. Adjust for better viewing and operation.

4. Tighten the knob to secure the mount.

Step 5: Installing Your zūmo in

the Mount

1. Fit the bottom of your zūmo into the cradle.

2. Tilt the zūmo back until it snaps into place.

WarnIng



Handlebar

base

Washers

Clutch/brake

clamp bracket

Spacers

Cradle

Base plate

Spacers

Base plate

Cradle

Power cable

Handlebar

base

Nuts

Double-socket

arm

Knob