Garmin zumo 665LM Инструкции по установке - Страница 2
Просмотреть онлайн или скачать pdf Инструкции по установке для GPS Garmin zumo 665LM. Garmin zumo 665LM 4 страницы.
Также для Garmin zumo 665LM: Краткое руководство по эксплуатации (8 страниц)
Печатать страницу
Option B: Installing the Handlebar Base to the Clutch/Brake Clamp Bracket:
Incorrectly installing the handlebar base to the clutch/brake bracket can cause brake or clutch
malfunction, which can result in damage to the vehicle and the risk of personal injury or death.
Garmin strongly recommends having an experienced installer with the proper knowledge of
clutch/brake systems install the unit.
Note: Both 1/4 in. standard and M6 bolts are included. Match the size of the factory bolts on
your clutch/brake clamp bracket.
1. Remove the two factory bolts on your clutch/brake clamp bracket.
2. Thread the new bolts through the handlebar base, spacers, and clamp bracket.
3. Tighten the bolts to secure the base.
Step 3: attaching the Base Plate to the zūmo Mount
1. Thread the M4 × 40 mm panhead screws through the washers, cradle, spacers, and base
plate.
2. Tighten the nuts to secure the base plate.
Panhead screws
Step 4: attaching the Base Plate to the Handlebar Base
1. Align the ball of the handlebar base and the ball of the base plate with the double-socket
arm.
2. Tighten the knob slightly.
3. Adjust for better viewing and operation.
4. Tighten the knob to secure the mount.
Step 5: Installing Your zūmo in
the Mount
1. Fit the bottom of your zūmo into the cradle.
2. Tilt the zūmo back until it snaps into place.
WarnIng
Handlebar
base
Washers
Clutch/brake
clamp bracket
Spacers
Cradle
Base plate
Spacers
Base plate
Base plate
Cradle
Cradle
Power cable
Power cable
Handlebar
Handlebar
base
base
Nuts
Double-socket
Double-socket
arm
arm
Knob
Knob