- ページ 10

ミシン Brother 2340CVのPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Brother 2340CV 16 ページ。 User manual - french and nederlands
Brother 2340CV にも: 操作マニュアル (40 ページ), (仏)マニュエル・ディレクション (41 ページ)

Brother 2340CV サービスマニュアル
HOW TO ADJUST......
Presser bar
guide bracket
Before adjustment, remove the panel assembly. Then turn the handwheel and raise the needle to its highest
position.
1. Raise the presser lever and loosen the set screw 5.95 securing the presser bar winding.
2. To adjust the height of the presser bar, raise the presser lever, and, at the point where the presser bar is horizontal,
raise or lower it until the first step is 4.8 - 5.0 mm above the needle plate. Check also to make sure that the needle
descents of the presser bar are not noticeably out of alignment with the needle descents of the needle plate.
3. After the adjustment has been completed, tighten the set screw 5.95 securely that holds the presser bar winding in
place.

Height of presser bar

Set screw 5.95
1
Needle
descents
2
Presser foot c
2'
4.8 - 5.0 mm (1st step)
How to use the gauge
Gauge
Presser
bar c
Needle plate
Presser bar
9