Brother 2340CV 서비스 매뉴얼 - 페이지 10

{카테고리_이름} Brother 2340CV에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother 2340CV 16 페이지. User manual - french and nederlands
Brother 2340CV에 대해서도 마찬가지입니다: 운영 매뉴얼 (40 페이지), (프랑스어) 마누엘 디렉션 (41 페이지)

Brother 2340CV 서비스 매뉴얼
HOW TO ADJUST......
Presser bar
guide bracket
Before adjustment, remove the panel assembly. Then turn the handwheel and raise the needle to its highest
position.
1. Raise the presser lever and loosen the set screw 5.95 securing the presser bar winding.
2. To adjust the height of the presser bar, raise the presser lever, and, at the point where the presser bar is horizontal,
raise or lower it until the first step is 4.8 - 5.0 mm above the needle plate. Check also to make sure that the needle
descents of the presser bar are not noticeably out of alignment with the needle descents of the needle plate.
3. After the adjustment has been completed, tighten the set screw 5.95 securely that holds the presser bar winding in
place.

Height of presser bar

Set screw 5.95
1
Needle
descents
2
Presser foot c
2'
4.8 - 5.0 mm (1st step)
How to use the gauge
Gauge
Presser
bar c
Needle plate
Presser bar
9