Brother 2340CV 서비스 매뉴얼 - 페이지 13
{카테고리_이름} Brother 2340CV에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother 2340CV 16 페이지. User manual - french and nederlands
Brother 2340CV에 대해서도 마찬가지입니다: 운영 매뉴얼 (40 페이지), (프랑스어) 마누엘 디렉션 (41 페이지)
페이지 인쇄
- 1. Table of Contents
- 2. How to Use this Manual
- 3. How to Adjust
- 3. Height of Needle Bar
- 3. Position of the Lowerlooper
- 3. Timing of the Double Chain Looper
- 3. Timing of the Lowerlooper
- 3. Height of Feed Dog (with a Differential Feed Dog)
- 3. Feed Timing
- 3. Height of Presser Bar
- 3. Thread Tension Adjustment
- 3. Position of Thread Take-Up
- 3. Position of Looper Thread Take-Up
- 3. Adjustment and Replacement for the Timing Belt
- 3. Changing the Light Bulb
HOW TO ADJUST......
Position of looper thread take-up
1. Loosen the thread take-up set screw.
2. Turn the pulley until the thread take-up is at its highest position, and adjust the distance from the F-cover hinge to
the thread take-up as shown in the illustration below.
3. After completing adjustment, tighten the DL thread take-up set screw.
DL Thread take-up lever A
DL Thread take-up lever B
Set screw
39.5 - 41.5 mm
43.0 - 45.0 mm
Upper of F-cover hinge plate
F-cover hinge plate
12