- ページ 11

カーナビゲーションシステム Garmin NavComm SL30のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Garmin NavComm SL30 48 ページ。 Vhf transceiver
Garmin NavComm SL30 にも：クイック・リファレンス・マニュアル (2 ページ), インストール (2 ページ)

ページを印刷する

Selecting a Comm Frequency

New frequencies are first selected as a Standby frequency

and then toggled to the Active side when desired. While

viewing the Standby frequency display, use the

SMALL

and

the desired frequency.

COM

1. Press

annunciator above the

LARGE

2. Turn the

MHz increments. The MHz selection range is between

118 and 136 in one MHz steps.

SMALL

3. Turn the

25 kHz increments. The kHz selection range is

between 000 and 975 kHz in 25 kHz steps. Note that

only two digits are displayed to the right of the decimal

point.

LARGE

4. Turn the

increase and counterclockwise to decrease the

frequency values. Standby frequency selection is not

inhibited during transmit.

FLIP/FLOP

5. Press the

frequency to the Active frequency.

Selecting a Nav Frequency

The selection of Nav frequencies is the same as for the

Comm frequencies. The annunciator above the

button will light.

NAV

1. Press

LARGE

2. Turn the

MHz increments. The MHz selection range is between

108 and 117 in one MHz steps.

SMALL

3. Turn the

50 kHz increments.

FLIP/FLOP

4. Press the

frequency to the Active frequency.

You cannot display both Nav and Comm

frequencies at the same time.

knobs on the right side of the SL30 to select

to reach the Comm radio function. The

COM

knob to change the values in one

knob to change the values in

SMALL

and

button to toggle the Standby

to reach the Nav radio function.

knob to change the values in one

knob to change the values in

button to toggle the Standby

Note

Getting Started

button will light.

knobs clockwise to

LARGE

NAV