- ページ 26

アビオニクス・ディスプレイ Garmin GNS 430のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Garmin GNS 430 27 ページ。 Friendlypanels gps for microsoft fs9 & fsx
Garmin GNS 430 にも: パイロット・マニュアル (22 ページ), 取扱説明書 (6 ページ), パイロット・マニュアル補遺 (27 ページ), パイロット・マニュアル補遺 (4 ページ), クイック・リファレンス (23 ページ), パイロット・マニュアル補遺 (22 ページ), 仕様 (2 ページ), パイロット・オペレーション・ハンドブック (10 ページ), クイック・リファレンス (17 ページ)

Garmin GNS 430 取扱説明書

3.7 PROCEDURES

The Procedures Page is displayed by pressing the PROC Key. The Procedures Page
provides direct access to approaches based upon the active flight plan or direct-to
destination. In either case, the departure and destination airports must have published
procedures associated with them.
To select an approach, departure, or arrival:
1. Press the PROC Key to display the Procedures Page.
2. Turn the large right knob to highlight 'Select Approach?' and press the ENT
Key.
3. A window appears listing the available procedures. Turn the large right knob to
highlight the desired procedure and press the ENT Key.
4. A second window appears listing the available transitions. Turn the large right
knob to highlight the desired transition waypoint and press the ENT Key. (The
approach 'Vectors' option assumes the pilot will receive vectors to the final
course segment of the approach and will provide navigation guidance relative to
the final approach course.)
5. Turn the large right knob to highlight 'Load?' or 'Activate?' and press the ENT
Key. ('Load?' adds the procedure to the flight plan without immediately using it
for navigation guidance. This allows the pilot to continue navigating the original
flight plan, but keeps the procedure available on the Active Flight Plan Page for
quick activation when needed.)