- ページ 10

インターホン・システム 2N Helios IP UniのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。2N Helios IP Uni 17 ページ。 Door access intercom

1.4 Button Tags – Insertion and

Replacement

Note



access to the name plates. The tags are easy

to insert and replace even without a manual.

You need not remove the front panel and

thus are not exposed to the risk of loss of

components while replacing the tags.

1. Loosen the name plate screw using

2. Remove the used or blank name tag

3. Close the name plate window and

4. Check the click effect of the buttons:

Button Tags – Insertion and Replacement

Every name plate includes a piece of foil, which can be written over manually,

using a waterproof permanent marker.

Always use waterproof foil (enclosed or other) for the tags. Never use

paper or ink jet printing to avoid damage due to water leakage!

Helios IP Uni provides an intuitive, easy

the wrench enclosed, for example.

You can open the name plate window

like a door without losing the

tightened screw.

and insert a new tag.

tighten the screw appropriately.

if the button fails to click properly

when pressed (when moved by

approx. 0.5 mm), the tag is too thick

or thin. Make sure that the button

clicks when you press it on either

end.

1.4