- ページ 15

船舶用GPSシステム Garmin GPSMAP 5008 - Marine GPS ReceiverのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Garmin GPSMAP 5008 - Marine GPS Receiver 19 ページ。 Weather and xm satellite radio gpsmap 4000 series; gpsmap 5000 series; gpsmap 6000 series; gpsmap 7000 series
Garmin GPSMAP 5008 - Marine GPS Receiver にも：クイック・リファレンス・マニュアル (2 ページ), オーナーズマニュアル (2 ページ), オーナーズマニュアル (2 ページ), テクニカル・リファレンス (30 ページ), 取付説明書 (25 ページ), クイック・リファレンス・マニュアル (2 ページ), 取付説明書 (25 ページ), 重要な安全情報 (48 ページ), 適合宣言 (1 ページ), 印刷マニュアル (2 ページ), 補足マニュアル (24 ページ)

Making the Final Connections to the GPSMAP 4000/5000 Unit

Once the power cable and the GPS 17 antenna (as well as any optional Garmin Marine Network devices, NMEA 0183 devices, NMEA 2000

connections, or video connections) have been wired to the boat, the cables must be connected to the GPSMAP 4000/5000 series unit.

There are seven connectors on the back of the unit, one for power, three for Garmin Marine Network devices, one for the NMEA 0183 cable,

one for a NMEA 2000 cable, and one for the marine video cable.

To attach the power cable, the NMEA 0183 cable, and the marine video cable, carefully press the cable into the correct port on the back of the

unit until it is firmly seated. Do not force the cable, as this may damage the pins. Once the cable is seated, turn the locking ring clockwise

until it stops.

To attach a Garmin Marine Network cable or a NMEA 2000 Micro-connector cable, carefully press the cable into the correct port on the back of

the unit until it is firmly seated. Do not force the cable, as this may damage the pins. Once the cable is seated, turn the locking ring clockwise

until it is tight. Be careful not to overtighten.

NMEA 000 cable

Micro-connector

Garmin Marine Network

connectors

GPSMAP 4000/5000 Series Installation Instructions

GPSMAP 4000/5000 Series Connectors

Power cable connector

Marine video cable

connector

NMEA 0 cable

connector