Garmin GPSMAP 5008 - Marine GPS Receiver 설치 지침 매뉴얼 - 페이지 15

{카테고리_이름} Garmin GPSMAP 5008 - Marine GPS Receiver에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GPSMAP 5008 - Marine GPS Receiver 19 페이지. Weather and xm satellite radio gpsmap 4000 series; gpsmap 5000 series; gpsmap 6000 series; gpsmap 7000 series
Garmin GPSMAP 5008 - Marine GPS Receiver에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (2 페이지), 소유자 매뉴얼 (2 페이지), 소유자 매뉴얼 (2 페이지), 기술 참조 (30 페이지), 설치 지침 매뉴얼 (25 페이지), 빠른 참조 매뉴얼 (2 페이지), 설치 지침 매뉴얼 (25 페이지), 중요 안전 정보 (48 페이지), 적합성 선언 (1 페이지), 인쇄 매뉴얼 (2 페이지), 보충 설명서 (24 페이지)

페이지 인쇄
Garmin GPSMAP 5008 - Marine GPS Receiver 설치 지침 매뉴얼
Making the Final Connections to the GPSMAP 4000/5000 Unit
Once the power cable and the GPS 17 antenna (as well as any optional Garmin Marine Network devices, NMEA 0183 devices, NMEA 2000
connections, or video connections) have been wired to the boat, the cables must be connected to the GPSMAP 4000/5000 series unit.
There are seven connectors on the back of the unit, one for power, three for Garmin Marine Network devices, one for the NMEA 0183 cable,
one for a NMEA 2000 cable, and one for the marine video cable.
To attach the power cable, the NMEA 0183 cable, and the marine video cable, carefully press the cable into the correct port on the back of the
unit until it is firmly seated. Do not force the cable, as this may damage the pins. Once the cable is seated, turn the locking ring clockwise
until it stops.
To attach a Garmin Marine Network cable or a NMEA 2000 Micro-connector cable, carefully press the cable into the correct port on the back of
the unit until it is firmly seated. Do not force the cable, as this may damage the pins. Once the cable is seated, turn the locking ring clockwise
until it is tight. Be careful not to overtighten.
NMEA 000 cable
Micro-connector
Garmin Marine Network
connectors
GPSMAP 4000/5000 Series Installation Instructions
GPSMAP 4000/5000 Series Connectors
Power cable connector
Marine video cable
connector
NMEA 0 cable
connector
5