- ページ 12

船舶用GPSシステム Garmin GPSMAP 76SのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Garmin GPSMAP 76S 19 ページ。 Gpsmap 76 series
Garmin GPSMAP 76S にも：適合宣言 (1 ページ), 適合宣言 (1 ページ), 仕様書 (2 ページ)

ページを印刷する

Going to a waypoint:

1. Press the NAV key.

2. Highlight 'Go To Point' then press the ENTER key.

3. Highlight 'Waypoints' then press the ENTER key.

4. Highlight 'MAP 1' then press the ENTER key.

5. Highlight the 'Goto' Button then press the ENTER key.

The GPSMAP 76S is now navigating to the waypoint MAP 1.

For a GPS to navigate, it has to be moving. Fortunately you can simulate

movement in the GPSMAP 76S. Press the PAGE key until the Compass Page is

displayed. At the top of the Compass Page there are two data ﬁ elds, 'Speed' and

'Bearing'. To simulate movement, press the ROCKER key up one time. This

will set a speed of 10 miles per hour. If you continue to press or hold the

ROCKER key, the speed will increase in 10 mph increments. For our purpose,

10 mph is ﬁ ne.

The Compass Page displays a Pointer and Compass Ring. The Pointer will

always point toward your destination (Bearing) while the Compass Ring reﬂ ects

the direction that you are facing or traveling (Track). In short, when you are

headed directly toward your destination, the Pointer will be pointed toward the

top of the display, and aligned with the vertical line on the Compass Ring. If you

are not heading toward your destination, turn until the Pointer is aligned with the

vertical line in the Compass Ring and pointed toward the top of the display.

The simulator will let you change the Track so that you can see what will

happen. Press the ROCKER key to the right until your Track has changed about

40°. This will simulate a direction change to the right. The Pointer should now

be pointed toward the left of the display indicating that you need to turn to the

left to head toward the waypoint. This is exactly what will happen during actual

navigation as you move off course.

Quick Start

Basic Navigation

Selecting a waypoint for navigation