- ページ 33
舶用機器 Garmin FUSION Apollo MS-WB670のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Garmin FUSION Apollo MS-WB670 44 ページ。 Marine hideaway stereo
Garmin FUSION Apollo MS-WB670 にも： 取付説明書 (19 ページ)
ページを印刷する
Enabling Volume Control of Zone 3 or 4 from a Connected Amplifier
By default the volume of zones 3 and 4 are controlled by the stereo. You can control the volume of these zones
using the connected amplifier instead.
1 Select
> SETTINGS.
2 Select the name of the stereo.
3 Select ZONE.
4 Select zone 3 or zone 4.
5 Select VOLUME CONTROL to clear the check box.
The audio signal from the zone is provided to the amplifier as a fixed-line-level output at maximum volume.
Adjusting the Subwoofer Filter
You can use the subwoofer filter setting to control the subwoofer cutoff frequency for each zone, which can
enhance the blend of the sound produced by the speakers and the subwoofer. Audio signals above the
selected frequency are not passed to the subwoofer.
NOTE: If a DSP setting has been applied to the zone using the Fusion-Link app, this setting cannot be changed
on the stereo.
1 Select
> SETTINGS.
2 Select the name of the stereo.
3 Select ZONE.
4 Select a zone.
5 Select SUB. FREQ..
6 Select a frequency.
Adjusting Additional Audio Settings for a Zone
1 Select
> SETTINGS.
2 Select the name of the stereo.
3 Select ZONE.
4 Select a zone.
5 Select one or more options:
• To limit the maximum volume output of this zone, select VOLUME LIMIT, and adjust the level.
• To adjust the right and left speaker balance of this zone, select BALANCE, and adjust the balance.
• To reduce the power output to the external amplifier associated with this zone, select EXT. AMP GAIN,
and adjust the gain level.
• To reduce the power output to the internal amplifier associated with this zone, select INT. AMP GAIN,
and adjust the gain level.
NOTE: This setting is available only for zones associated with an internal amplifier, typically zones 1 and
2.
• To change the output of this zone from stereo to mono, select MONO.
NOTE: The mono setting is useful if a listening position is closer to one speaker than the other and
predominantly hear only that channel. The mono setting combines both channels in each speaker in the
zone.
General Settings
27