Garmin FUSION Apollo MS-WB670 소유자 매뉴얼 - 페이지 33

{카테고리_이름} Garmin FUSION Apollo MS-WB670에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin FUSION Apollo MS-WB670 44 페이지. Marine hideaway stereo
Garmin FUSION Apollo MS-WB670에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (19 페이지)

페이지 인쇄

Enabling Volume Control of Zone 3 or 4 from a Connected Amplifier

By default the volume of zones 3 and 4 are controlled by the stereo. You can control the volume of these zones

using the connected amplifier instead.

1 Select

> SETTINGS.

2 Select the name of the stereo.

3 Select ZONE.

4 Select zone 3 or zone 4.

5 Select VOLUME CONTROL to clear the check box.

The audio signal from the zone is provided to the amplifier as a fixed-line-level output at maximum volume.

Adjusting the Subwoofer Filter

You can use the subwoofer filter setting to control the subwoofer cutoff frequency for each zone, which can

enhance the blend of the sound produced by the speakers and the subwoofer. Audio signals above the

selected frequency are not passed to the subwoofer.

NOTE: If a DSP setting has been applied to the zone using the Fusion-Link app, this setting cannot be changed

on the stereo.

1 Select

> SETTINGS.

2 Select the name of the stereo.

3 Select ZONE.

4 Select a zone.

5 Select SUB. FREQ..

6 Select a frequency.

Adjusting Additional Audio Settings for a Zone

1 Select

> SETTINGS.

2 Select the name of the stereo.

3 Select ZONE.

4 Select a zone.

5 Select one or more options:

• To limit the maximum volume output of this zone, select VOLUME LIMIT, and adjust the level.

• To adjust the right and left speaker balance of this zone, select BALANCE, and adjust the balance.

• To reduce the power output to the external amplifier associated with this zone, select EXT. AMP GAIN,

and adjust the gain level.

• To reduce the power output to the internal amplifier associated with this zone, select INT. AMP GAIN,

and adjust the gain level.

NOTE: This setting is available only for zones associated with an internal amplifier, typically zones 1 and

• To change the output of this zone from stereo to mono, select MONO.

NOTE: The mono setting is useful if a listening position is closer to one speaker than the other and

predominantly hear only that channel. The mono setting combines both channels in each speaker in the

zone.

General Settings