舶用機器 Garmin GFS 10 - Fuel SensorのPDF 設定マニュアルをオンラインで閲覧またはダウンロードできます。Garmin GFS 10 - Fuel Sensor 2 ページ。 Fuel sensor
Garmin GFS 10 - Fuel Sensor にも：クイック・リファレンス・マニュアル (24 ページ), テクニカル・リファレンス (30 ページ), 取付説明書 (44 ページ), 重要な安全情報 (48 ページ), 適合宣言 (1 ページ), 取付説明書 (49 ページ)

ページを印刷する

Troubleshooting Fuel Gauge Type

When wired to a fuel gauge, the gauge type defaults to auto Detect. If the fuel-level

reading on your Garmin chartplotter or marine instrument changes with the engine RPM,

the GFS 10 could be detecting the wrong type of gauge.

note: The fuel level changes with the motion of the boat. Perform this test when the boat is

not moving.

To test the gauge-type setting:

1. When the boat is not moving, put the engine in neutral.

2. Use the throttle to increase the engine RPM. If the fuel-level reading changes with the

engine RPM, change the gauge type.

To change the gauge-type setting:

1. While viewing the NMEA 2000 or the CANet device configuration menu, select the

GFS 10 device.

Select Config > Gauge

Type.

Choose 1 Coil or 2 Coil and repeat the gauge-type setting test.

Troubleshooting the Fuel-Flow Rate

If the fuel-flow information received from the GFS 10 appears inaccurate, you can

manually adjust the fuel-flow reading.

To adjust the fuel-flow rate:

1. While viewing the NMEA 2000 or the CANet device configuration menu, select the

GFS 10 device.

Select Config > Flow

Adjustment.

3. Enter a positive or negative adjustment.

example: When you set the Flow Adjustment to +10% , a flow reading of 20 gal./hr.

(75 l/h) would change to a reading of 22 gal./hr. (82.5 l/h), because 20 gal. × 110% = 22 gal.

(75 l × 110% = 82.5 l).

Restoring Factory Default Settings

You can restore factory default settings to the GFS 10. You will lose all custom

configuration and calibration settings when you restore factory default settings.

To restore factory default settings:

1. While viewing the NMEA 2000 or the CANet device configuration menu, select the

GFS 10 device.

Select Config > Factory

Defaults.

GFS

10 Sensor Configuration Guide

™

See the Important Safety and Product Information guide in the product box for product warnings and

other important information.

The GFS 10 provides fuel-flow (volume/time) information for various screens, data fields,

or digital gauges of NMEA 2000

-compatible and Garmin

display devices. For a list of compatible Garmin chartplotters and devices, visit

www.garmin.com.

Important: This document provides specific configuration information for the GFS 10

using your NMEA 2000-compatible or Garmin CANet-compatible display device (such as

a GMI

10 or GPSMAP

545). To access the NMEA 2000 or CANet device configuration

™

menu on your display device, consult the documentation provided with your display

device.

CautIon: The GFS 10 is a sensor that helps you better determine the amount of fuel

used on your boat, and you should not rely solely on the GFS 10 for fuel-level information.

Carefully compare information displayed on the unit to all available fuel-level instruments

and sources.

September 2008

Part Number 190-00884-01 Rev. A

CANet

-compatible connected

Printed in Taiwan