- ページ 27

オール・イン・ワン・プリンター Brother MFC-J5330DWのPDF リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC-J5330DW 34 ページ。 Mfc-j6930dw
Brother MFC-J5330DW にも：クイック・セットアップ・マニュアル (2 ページ), 製品安全マニュアル (20 ページ)

ページを印刷する

Error Message

Touchscreen

Initialisation

Failed

Tray #1 Settings

Tray #2 Settings

MP Tray Settings

Unable to Clean

Unable to

Initialize XX

Unable to Print

Unable to Scan XX Disconnect the machine from the power for several minutes, and then

Unusable Device

Disconnect device

from front

connector & turn

machine off &

then on

Unusable Device

Please disconnect

USB device.

Action

The Touchscreen was pressed before the power on initialisation was

completed.

Make sure nothing is touching or resting on the Touchscreen,

especially when plugging the machine in.

Debris may be stuck between the lower part of the Touchscreen and

its frame.

Insert a piece of stiff paper between the lower part of the Touchscreen

and its frame and slide it back and forth to push out the debris.

This message is displayed when the setting to confirm the paper type

and size is enabled.

To not display this confirmation message, change the setting to Off.

For more information, see the Online User's Guide: Change the Check

Paper Size Setting.

A foreign object, such as a paper clip or a piece of ripped paper, is in

the machine.

Open the scanner cover and remove any foreign objects and paper

scraps from inside the machine. If the error message continues,

disconnect the machine from the power for several minutes, and then

reconnect it.

You can try additional paper jam clear operations.

For more information, see the Online User's Guide: Remove Paper

Scraps.

If you cannot print received faxes, transfer them to another fax

machine or to your computer.

For more information, see the Online User's Guide: Transfer Your

Faxes or Fax Journal Report.

reconnect it.

If you cannot print received faxes, transfer them to another fax

machine or to your computer.

For more information, see the Online User's Guide: Transfer Your

Faxes or Fax Journal Report.

A broken device is connected to the USB direct interface.

Unplug the device from the USB direct interface, then press

turn the machine off and then on again.

A USB device or USB flash drive that is not supported has been

connected to the USB direct interface.

Unplug the device from the USB direct interface. Turn the machine off

and then on again.