- ページ 4

ホブ AEG 24" HK654070XBのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AEG 24" HK654070XB 20 ページ。 24” electric cooktop
AEG 24" HK654070XB にも：ユーザーマニュアル (19 ページ), ユーザーマニュアル (16 ページ), ユーザーマニュアル (40 ページ)

ページを印刷する

www.aeg.com

Do not store items on the cooking surfaces.

•

Metallic objects such as knives, forks, spoons and lids

•

should not be placed on the hob surface since they

can get hot.

Do not use a steam cleaner to clean the appliance.

•

If the glass ceramic surface / glass surface is cracked,

•

switch off the appliance to avoid the possibility of

electric shock.

If the supply cord is damaged, it must be replaced by

•

the manufacturer, an authorized Service or similarly

qualified persons in order to avoid a hazard.

2. SAFETY INSTRUCTIONS

2.1 Installation

WARNING!

Only a qualified person must

install this appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Obey the installation instruction

supplied with the appliance.

• Keep the minimum distance from the

other appliances and units.

• Always be careful when you move the

appliance because it is heavy. Always

wear safety gloves.

• Seal the cut surfaces with a sealant to

prevent moisture to cause swelling.

• Protect the bottom of the appliance

from steam and moisture.

• Do not install the appliance adjacent

to a door or under a window. This

prevents hot cookware to fall from the

appliance when the door or the

window is opened.

• If the appliance is installed above

drawers make sure that the space,

between the bottom of the appliance

and the upper drawer, is sufficient for

air circulation.

• The bottom of the appliance can get

hot. Make sure to install a non-

combustile separation panel under

the appliance to prevent access to the

bottom.

2.2 Electrical Connection

WARNING!

Risk of fire and electrical

shock.

• All electrical connections should be

made by a qualified electrician.

• The appliance must be earthed.

• Before carrying out any operation

make sure that the appliance is

disconnected from the power supply.

• Make sure that the electrical

information on the rating plate agrees

with the power supply. If not, contact

an electrician.

• Make sure the appliance is installed

correctly. Loose and incorrect

electricity mains cable or plug (if

applicable) can make the terminal

become too hot.

• Use the correct electricity mains

cable.

• Do not let the electricity mains cable

tangle.

• Make sure that a shock protection is

installed.

• Use the strain relief clamp on the

cable.

• Make sure the mains cable or plug (if

applicable) does not touch the hot

appliance or hot cookware, when you

connect the appliance to the near

sockets

• Do not use multi-plug adapters and

extension cables.