AEG 24" HK654070XB Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Варильна поверхня AEG 24" HK654070XB. AEG 24" HK654070XB 20 сторінок. 24” electric cooktop
Також для AEG 24" HK654070XB: Посібник користувача (19 сторінок), Посібник користувача (16 сторінок), Посібник користувача (40 сторінок)

Друкувати сторінку

www.aeg.com

Do not store items on the cooking surfaces.

•

Metallic objects such as knives, forks, spoons and lids

•

should not be placed on the hob surface since they

can get hot.

Do not use a steam cleaner to clean the appliance.

•

If the glass ceramic surface / glass surface is cracked,

•

switch off the appliance to avoid the possibility of

electric shock.

If the supply cord is damaged, it must be replaced by

•

the manufacturer, an authorized Service or similarly

qualified persons in order to avoid a hazard.

2. SAFETY INSTRUCTIONS

2.1 Installation

WARNING!

Only a qualified person must

install this appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Obey the installation instruction

supplied with the appliance.

• Keep the minimum distance from the

other appliances and units.

• Always be careful when you move the

appliance because it is heavy. Always

wear safety gloves.

• Seal the cut surfaces with a sealant to

prevent moisture to cause swelling.

• Protect the bottom of the appliance

from steam and moisture.

• Do not install the appliance adjacent

to a door or under a window. This

prevents hot cookware to fall from the

appliance when the door or the

window is opened.

• If the appliance is installed above

drawers make sure that the space,

between the bottom of the appliance

and the upper drawer, is sufficient for

air circulation.

• The bottom of the appliance can get

hot. Make sure to install a non-

combustile separation panel under

the appliance to prevent access to the

bottom.

2.2 Electrical Connection

WARNING!

Risk of fire and electrical

shock.

• All electrical connections should be

made by a qualified electrician.

• The appliance must be earthed.

• Before carrying out any operation

make sure that the appliance is

disconnected from the power supply.

• Make sure that the electrical

information on the rating plate agrees

with the power supply. If not, contact

an electrician.

• Make sure the appliance is installed

correctly. Loose and incorrect

electricity mains cable or plug (if

applicable) can make the terminal

become too hot.

• Use the correct electricity mains

cable.

• Do not let the electricity mains cable

tangle.

• Make sure that a shock protection is

installed.

• Use the strain relief clamp on the

cable.

• Make sure the mains cable or plug (if

applicable) does not touch the hot

appliance or hot cookware, when you

connect the appliance to the near

sockets

• Do not use multi-plug adapters and

extension cables.