- ページ 13

ホブ AEG 600 MのPDF 操作および設置マニュアルをオンラインで閲覧またはダウンロードできます。AEG 600 M 18 ページ。 Ceramic glass hob
AEG 600 M にも：据付・取扱説明書 (16 ページ)

Safety Instructions for the Installer

• This hob must be installed by qualified personnel, according to the

manufacturer's instructions and to the relevant country standards.

• In respect of fire protection, this appliance corresponds to type Y (IEC

335-2-6). Only this type of appliance may be installed with a high

cupboard or wall on one side.

• It is not permitted to fit drawers below the cooking surface.

• Protection against electric shock must be provided by the installa-

tion.

• The kitchen unit in which the appliance is fitted must satisfy the

requirements of DIN 68930 in respect of stability.

• Built-in ovens and cooking surfaces are fitted with special connector

systems. They may only be combined with appliances with a matching

system.

• All cut surfaces are to be sealed with a suitable sealant for protection

against moisture.

• On tiled work surfaces, the joints in the area where the hob sits on

the surface must be completely filled with grout.

• On natural, artificial stone, or ceramic tops, the snap action springs

must be bonded in place.

• Ensure that the seal is correctly seated in the frame and that it is

seated against the work surface without leaving any gaps. Additional

silicon sealant must not be applied, this will make removal more diffi-

cult in the event of the need for service.

• To remove the hob, it must be pressed out from below.

• Connect the wiring harness plugs with the respective sockets of the

same colour of the built-in oven or switch box.

Installation Instructions