- ページ 11

ホブ AEG 6530 DG-MのPDF 取扱説明書およびインストールブックをオンラインで閲覧またはダウンロードできます。AEG 6530 DG-M 12 ページ。 Electrolux user information gas hob
AEG 6530 DG-M にも：取扱説明書およびインストールブック (25 ページ)

ページを印刷する

Connection to the gas supply

should be with either rigid or semi-

rigid pipe, i.e. steel or copper.

The connection should be suitable

for connection to RC ½ (½ BSP

male conical thread).

When the final connection has been

made, it is essential that a thorough

leak test is carried out on the hob

and installaion.

Ensure that the main connection

pipe does not exert any strain on

the hob.

It is important to install the

elbow correctly, with the

shoulder on the end of the

thread, fitted to the hob

connection pipe.

Failure to ensure to correct

assembly will cause leakage

of gas.

Pressure test

The unit should be pressure-tested

at Max. 150 mbar.

Cleaning of gas burners

Clean the control panel and knobs plus

the pan grid, as well as burner caps and

rings, with ordinary cleansing agents.

Never use scouring powder, Brillo

pads, metal pads or other scouring

agents on enamelled or painted

surfaces!

Avoid boil-over

If water accidentally gets into the edge

of the burner head (boil-over) the

water must be removed with a lint-free

cloth before the burner is turned on

again.

Likewise, caps and grids must be

thoroughly wiped off before the gas

ring is used again so that the boil-over

does not permanently scar the enamel

or paint.