- ページ 19
ノートパソコン Fujitsu Lifebook B3000のPDF バイオマニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu Lifebook B3000 29 ページ。 Lifebook b series
Fujitsu Lifebook B3000 にも： バイオマニュアル (28 ページ)
ページを印刷するSECURITY MENU – SETTING THE SECURITY FEATURES
The Security menu allows you to set up the data security
features of your notebook to fit your operating needs and
to view the current data security configuration. Follow
the instructions for
Navigating through the Setup Utility
to make any changes.
• If you set a password, write it down and
keep it in a safe place. If you forget the
password you will have to contact your
support representative to regain access
to your secured functions and data.
• If you make an error when re-entering
the password a [Warning] will be
displayed on the screen. To try again,
press the Enter key and then retype the
password. Press the Esc key to abort the
password setting process.
• Boot sector protection must be set to
[Normal] to install or upgrade an oper-
ating system.
Main
Supervisor Password Is:
User Password Is:
Set Supervisor Password
Set User Password
Minimum User Password Length
Password on Boot:
On Automatic Wake up:
KB Lock on Resume:
Boot from Removable Media:
Flash Write
Hard Disk Security
Owner Information
Security Panel on Resume:
F1
Help
ESC
Exit
PhoenixBIOS Setup Utility
Advanced
Security
Select Item
-/Space
Select Menu
Enter
Figure 12. Security Menu
• Entering a password incorrectly three
times in a row will cause the keyboard
and mouse to be locked out and the
warning [System Disabled] to be
displayed. If this happens, restart the
computer by turning off and on the
power with the power switch and use
the correct password on reboot.
• If the Password on Resume is Enabled
and the Password on Boot is Disabled
you will not have to type your password
upon resuming the system from the
Suspend or Save-to-Disk modes. Power
Management Security will work only if
Password on Boot is enabled.
The following tables show the names of the menu fields
for the Security menu and submenus, all of the options
for each field, the default settings and a description of the
field's function and any special information needed to
help understand the field's use. The default condition is
no passwords required and no write protection.
Boot
Info
Exit
Clear
Clear
Press <Enter> key to
set Supervisor password
[Enter]
to enable any password
[Enter]
features.
[0]
[Disabled]
Then password entry is
[Disabled]
required to enter BIOS
[Disabled]
Setup.
[All]
[Enabled]
[Enabled]
Change Values
Select Sub-Menu
S e c u r i t y M e n u
Item Specific Help
F9
Setup Defaults
F10
Save and Exit
19