Fujitsu Lifebook B3000 Bios Kılavuzu - Sayfa 19

Dizüstü Bilgisayar Fujitsu Lifebook B3000 için çevrimiçi göz atın veya pdf Bios Kılavuzu indirin. Fujitsu Lifebook B3000 29 sayfaları. Lifebook b series
Ayrıca Fujitsu Lifebook B3000 için: Bios Kılavuzu (28 sayfalar)

Sayfayı Yazdır

SECURITY MENU – SETTING THE SECURITY FEATURES

The Security menu allows you to set up the data security

features of your notebook to fit your operating needs and

to view the current data security configuration. Follow

the instructions for

Navigating through the Setup Utility

to make any changes.

• If you set a password, write it down and

keep it in a safe place. If you forget the

password you will have to contact your

support representative to regain access

to your secured functions and data.

• If you make an error when re-entering

the password a [Warning] will be

displayed on the screen. To try again,

press the Enter key and then retype the

password. Press the Esc key to abort the

password setting process.

• Boot sector protection must be set to

[Normal] to install or upgrade an oper-

ating system.

Main

Supervisor Password Is:

User Password Is:

Set Supervisor Password

Set User Password

Minimum User Password Length

Password on Boot:

On Automatic Wake up:

KB Lock on Resume:

Boot from Removable Media:

Flash Write

Hard Disk Security

Owner Information

Security Panel on Resume:

Help

ESC

Exit

PhoenixBIOS Setup Utility

Advanced

Security

Select Item

-/Space

Select Menu

Enter

Figure 12. Security Menu

• Entering a password incorrectly three

times in a row will cause the keyboard

and mouse to be locked out and the

warning [System Disabled] to be

displayed. If this happens, restart the

computer by turning off and on the

power with the power switch and use

the correct password on reboot.

• If the Password on Resume is Enabled

and the Password on Boot is Disabled

you will not have to type your password

upon resuming the system from the

Suspend or Save-to-Disk modes. Power

Management Security will work only if

Password on Boot is enabled.

The following tables show the names of the menu fields

for the Security menu and submenus, all of the options

for each field, the default settings and a description of the

field's function and any special information needed to

help understand the field's use. The default condition is

no passwords required and no write protection.

Boot

Info

Exit

Clear

Press <Enter> key to

set Supervisor password

[Enter]

to enable any password

[Enter]

features.

[0]

[Disabled]

Then password entry is

[Disabled]

required to enter BIOS

[Disabled]

Setup.

[All]

[Enabled]

Change Values

Select Sub-Menu

S e c u r i t y M e n u

Item Specific Help

Setup Defaults

F10

Save and Exit