- ページ 16
ラベルメーカー Brother P-TOUCH CUBE PT-P300BTのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Brother P-TOUCH CUBE PT-P300BT 18 ページ。 Tze tape
Brother P-TOUCH CUBE PT-P300BT にも： ユーザーマニュアル (18 ページ), ユーザーマニュアル (18 ページ), ユーザーマニュアル (18 ページ), ユーザーマニュアル (18 ページ), ユーザーマニュアル (18 ページ)
ページを印刷する
- 1. Safety Precautions
- 2. General Precautions
- 3. Performing Routine Maintenance
- 4. Unpack the PT-P300BT
- 5. Specifications
- 6. Troubleshooting
- 7. Troubleshooting (Cont)
- 8. Parts and Components
- 9. Install Batteries or Connect the AC Adapter
- 10. Inserting the Tape Cassette
- 11. Turn the Label Printer on or off
- 12. LED Indications
- 13. Pair the Label Printer with Your Mobile Device
- 14. Print Labels
6. Pair the Label Printer with Your Mobile Device
On your mobile device:
1. In Settings, access the Bluetooth option, and turn it ON.
2. When the list of discovered Bluetooth devices appears, tap PT-P300BT**** (where ****
is the last four digits of your label printer's serial number. Alternatively, you can find your
machine number on the sticker below the Power Button). The unit's serial number is
located where the TZe Tape Cassette is set inside the Cassette Cover.
3. If asked to enter a PIN Code, enter "0000".
NOTE
using.
and then try to connect again:
- The machine may be connected to another mobile device. If so, turn off Bluetooth on tha
device, or turn off your machine and then on again.
- Check that the machine is not in sleep mode.
- Place your mobile device as close to the machine as possible.
- Make sure there are no obstacles or items that emit radio waves, such as a microwave
oven, between the machine and your mobile device. If such obstacles or items are present
use the label printer away from them.
creating or printing labels. Closing the Smart Cover may interrupt data communication, and
your labels will not print.
er slightly, depending on the smartphone or tablet you are
mobile device via Bluetooth, check the following