- ページ 5

ラベルメーカー Brother PT-E500のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Brother PT-E500 6 ページ。 Electronic labeling system
Brother PT-E500 にも：クイック・セットアップ・マニュアル (46 ページ)

ページを印刷する

GETTING STARTED - Turning Power On/Off

1. Press the

(Power) to turn the P-touch printer on/off

GETTING STARTED – Installing a Label Cartridge

1. If the new label cartridge has a

cardboard stopper, be sure to remove

the stopper before inserting the

cassette.

2. Check that the end of the tape is not

bent and it passes through the tape

guide at least ½ inch, also make sure

that the ink ribbon is wound tight.

(see photo).

3. After making sure that the power is off,

place the P-touch printer on a flat surface and open the rear cover. If there is

already a tape cassette in the P-touch, remove it by pulling it straight up.

4. Insert the label cartridge into the compartment with the end of the tape

protruding out of the P-touch printer tape

exit slot and press firmly until you hear it

click.

When inserting the label cartridge, make

sure that the tape and ribbon do not

catch on the print head. If there is slack in the tape, pull the tape

through the tape guide.

5. Close the rear cover.

6. DO NOT PULL THE LABEL WHILE IT IS COMING OUT OF THE

PRINTER. DOING SO WILL CAUSE THE INK RIBBON TO PULL OUT OF

THE EXIT SLOT AND TO BE CUT WHEN THE LABEL IS CUT. THIS

WILL CAUSE THE LABEL CARTRIDGE TO NO LONGER FUNCTION.

Page - 6

GETTING STARTED – Key Names & Functions

18. BS (backspace) - Deletes the character to the left of the cursor.

19. Shift - Use this key in combination with letter and number keys to type

uppercase letters or the symbols indicated on the number keys.

20. Caps - Turns Caps mode on and off.

21. Enter - Enters a new line when entering text.

Shift Enter - For only the "general" label application type, enters a new

block.

22. Accent - Use this key to select and enter an accented character.

23. Space - Enters a space or returns a setting to the default value.

24. File - Enables frequently used labels in the file memory to be printed,

opened, saved or deleted.

25. Symbol - Use this key to select and enter a symbol from a list of available

symbols.

26. Bar Code - Opens the Bar Code Setup Screen.

27. Serialize - Prints serialized labels.

28. Adv. Serialize - Serializes and prints any 2 numbers on a label

simultaneously.

29. Database - Use the selected range of records in the downloaded database

to create labels.

Page - 3

(continued)