Brother PT-E500 Посібник оператора - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник оператора для Виробник етикеток Brother PT-E500. Brother PT-E500 6 сторінок. Electronic labeling system
Також для Brother PT-E500: Посібник з швидкого налаштування (46 сторінок)
Друкувати сторінку
GETTING STARTED - Turning Power On/Off
1. Press the
(Power) to turn the P-touch printer on/off
GETTING STARTED – Installing a Label Cartridge
1. If the new label cartridge has a
cardboard stopper, be sure to remove
the stopper before inserting the
cassette.
2. Check that the end of the tape is not
bent and it passes through the tape
guide at least ½ inch, also make sure
that the ink ribbon is wound tight.
(see photo).
3. After making sure that the power is off,
place the P-touch printer on a flat surface and open the rear cover. If there is
already a tape cassette in the P-touch, remove it by pulling it straight up.
4. Insert the label cartridge into the compartment with the end of the tape
protruding out of the P-touch printer tape
exit slot and press firmly until you hear it
click.
When inserting the label cartridge, make
sure that the tape and ribbon do not
catch on the print head. If there is slack in the tape, pull the tape
through the tape guide.
5. Close the rear cover.
6. DO NOT PULL THE LABEL WHILE IT IS COMING OUT OF THE
PRINTER. DOING SO WILL CAUSE THE INK RIBBON TO PULL OUT OF
THE EXIT SLOT AND TO BE CUT WHEN THE LABEL IS CUT. THIS
WILL CAUSE THE LABEL CARTRIDGE TO NO LONGER FUNCTION.
Page - 6
GETTING STARTED – Key Names & Functions
18. BS (backspace) - Deletes the character to the left of the cursor.
19. Shift - Use this key in combination with letter and number keys to type
uppercase letters or the symbols indicated on the number keys.
20. Caps - Turns Caps mode on and off.
21. Enter - Enters a new line when entering text.
Shift Enter - For only the "general" label application type, enters a new
block.
22. Accent - Use this key to select and enter an accented character.
23. Space - Enters a space or returns a setting to the default value.
24. File - Enables frequently used labels in the file memory to be printed,
opened, saved or deleted.
25. Symbol - Use this key to select and enter a symbol from a list of available
symbols.
26. Bar Code - Opens the Bar Code Setup Screen.
27. Serialize - Prints serialized labels.
28. Adv. Serialize - Serializes and prints any 2 numbers on a label
simultaneously.
29. Database - Use the selected range of records in the downloaded database
to create labels.
Page - 3
(continued)