- ページ 34

ラベルメーカー Brother PT-E550WのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother PT-E550W 50 ページ。 Electronic labeling system
Brother PT-E550W にも：クイック・セットアップ・マニュアル (47 ページ), クイック・セットアップ・マニュアル (49 ページ)

GETTING STARTED

Press the Feed & Cut key.

"Feed & Cut?" will appear on the LCD display.

Using the

The message "Feeding Tape... Please Wait" appears while the tape is fed.

To exit or cancel this function press Esc.

You can change the contrast setting of the LCD display to one of five levels (+2, +1, 0, -1,

-2) to make the screen easier to read. The default setting is "0".

Press the Menu key, select "Adjustment" using the

or Enter key.

Select "LCD Contrast" using the

key.

Press the OK or Enter key.

• Press the Esc key to return to the previous step.

• Pressing the Space key on the contrast setting screen sets the contrast to the default value "0".

You can change the backlight setting either to on or off.

The display is easier to see with the backlight on. The default setting is on.

Press the Menu key, and then select "Advanced" using the

Enter key.

Select "Backlight" using the

Select "On" or "Off" using the

• Power can be saved when the backlight is turned off.

• The backlight will automatically turn off after 10 seconds of inactivity, press any key to re-

enable it. During printing, the backlight is disabled. The backlight turns on during data

transmissions.

LCD Display

key to select the "Feed Only", and then press either OK or Enter key.

LCD Display

key, and then set the value using the

key, and press the OK or Enter key.

key, and then press the OK

key. Press OK or