- ページ 36

ラベルメーカー Brother PT-E550WのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother PT-E550W 50 ページ。 Electronic labeling system
Brother PT-E550W にも：クイック・セットアップ・マニュアル (47 ページ), クイック・セットアップ・マニュアル (49 ページ)

EDITING A LABEL

You can select six different types of labeling applications.

Labels printed with this mode can be used for general purposes. In this

mode you can specify the following items.

• Label Length: Auto, 0.4" (10 mm) - 39.0" (999 mm)

• Orientation:

When the GENERAL mode is selected, you can press the Shift key and

then press the Enter key to add a new block.

Labels printed with this mode can be used to identify various faceplates.

Block of text is evenly spaced on a single label. In this mode, and you

can specify the following items.

• Label Length: 2.0" (50 mm), 0.4" (10 mm) - 39.0" (999 mm)

• # of Blocks: 1, 1 - 5

• Orientation:

Labels printed with this mode can be wrapped around a cable or wire.

In the CABLE WRAP mode, the text is rotated 90

printed, you can also specify the following items.

• UOM: Dia(Ø) (Custom Diameter), Length (Custom Length), CAT5/6,

CAT6e, COAX, AWG

• Value: Depending on UOM

• Repeat: On, Off

Text: Type in single or multiple lines of data

When using Flexible ID Tape:

• We recommend using Flexible ID Tape for Cable Wrap and Cable Flag labels.

• Labels made with Flexible ID Tape are not designed for use as electrical insulation.

• When wrapping labels around cylindrical

objects, the diameter (1) of the object should be

at least 0.12" (3 mm).

• The overlapping (2) ends of the label or the label

flag should be at least 0.2" (5 mm).

(Horizontal),

(Vertical)

counterclockwise and

Horizontal

ABCDE

Vertical

1 block

2 blocks