Brother PT-E550W Quick Setup Manual - Page 36

Browse online or download pdf Quick Setup Manual for Label Maker Brother PT-E550W. Brother PT-E550W 50 pages. Electronic labeling system
Also for Brother PT-E550W: Quick Setup Manual (47 pages), Quick Setup Manual (49 pages)

Print Page

EDITING A LABEL

You can select six different types of labeling applications.

GENERAL

Labels printed with this mode can be used for general purposes. In this

mode you can specify the following items.

• Label Length: Auto, 0.4" (10 mm) - 39.0" (999 mm)

• Orientation:

When the GENERAL mode is selected, you can press the Shift key and

then press the Enter key to add a new block.

FACEPLATE

Labels printed with this mode can be used to identify various faceplates.

Block of text is evenly spaced on a single label. In this mode, and you

can specify the following items.

• Label Length: 2.0" (50 mm), 0.4" (10 mm) - 39.0" (999 mm)

• # of Blocks: 1, 1 - 5

• Orientation:

CABLE WRAP

Labels printed with this mode can be wrapped around a cable or wire.

In the CABLE WRAP mode, the text is rotated 90

printed, you can also specify the following items.

• UOM: Dia(Ø) (Custom Diameter), Length (Custom Length), CAT5/6,

CAT6e, COAX, AWG

• Value: Depending on UOM

• Repeat: On, Off

Text: Type in single or multiple lines of data

When using Flexible ID Tape:

• We recommend using Flexible ID Tape for Cable Wrap and Cable Flag labels.

• Labels made with Flexible ID Tape are not designed for use as electrical insulation.

• When wrapping labels around cylindrical

objects, the diameter (1) of the object should be

at least 0.12" (3 mm).

• The overlapping (2) ends of the label or the label

flag should be at least 0.2" (5 mm).

Selecting a Labeling Application Type

(Horizontal),

(Vertical)

counterclockwise and

Horizontal

ABCDE

Vertical

1 block

2 blocks