Brother PT-E550W Quick Setup Manual - Page 33

Browse online or download pdf Quick Setup Manual for Label Maker Brother PT-E550W. Brother PT-E550W 50 pages. Electronic labeling system
Also for Brother PT-E550W: Quick Setup Manual (47 pages), Quick Setup Manual (49 pages)

Print Page

Setting

AC Adapter

• If you connect the AC adapter to the P-touch labeling system after you specified "Auto Power

Off", the setting for "AC Adapter" becomes valid.

• The default value is "1hr." for the AC Adapter and "30min." for the Li-ion battery.

• Be sure to feed tape to remove any slack in the tape and ink ribbon after inserting the tape

cassette.

• Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon to

be discharged with the tape. The tape may no longer be functional after the ink ribbon

discharges.

• Do not block the tape exit slot during printing or when feeding tape. Doing so will cause the tape

to jam.

Feed & Cut

The Feed & Cut function feeds 0.96" (24.5mm) of blank tape, and then cuts the tape.

Press the Feed & Cut key.

"Feed & Cut?" will appear on the LCD display.

Using the

The message "Feeding Tape... Please Wait" appears while the tape is fed, and then the

tape is cut.

To exit or cancel this function press Esc.

Feed Only

This function will advance the tape approximately 0.96" (24.5mm), resulting in a blank label

sticking out of the tape cassette. This action is recommended when using Fabric tapes, which

should be cut using scissors.



Auto Power-Off Time

Value

Off

10min.

20min.

30min.

40min.

50min.

1hr.

2hr.

4hr.

8hr.

12hr.

Feeding Tape

key to select the "Feed & Cut" and then press either OK or Enter.

