- ページ 13

ノートパソコン Fujitsu UH-XのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu UH-X 18 ページ。
Fujitsu UH-X にも：クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), ユーザーマニュアル (19 ページ)

Low Battery Condition

The battery level indicator on the status indicator LED

turns red. If it turns red, connect the AC adapter to

your notebook immediately to recharge the battery.

 The use of a weak battery may result in lost of

data you are currently working on. When the

battery runs low, connect the AC adapter to

your notebook as soon as an external power

source is available or immediately save the

data you are working on, exit all applications

and turn off the notebook.

 Accessing data on the storage drive consumes

a lot of power. Therefore when the battery is

weak, connect an AC adapter to the notebook

before accessing data on the storage drive.

 If a battery is weak and there is no system

activity, the notebook may go into standby

(i.e. suspend) mode.

However, if there is system activity, the

notebook will go into standby mode only after

the system activity has completed its

processing.

 The notebook will go into standby mode when

the indicator reaches 3%. This is the default

setting of the notebook.

NOTE 1:

Battery temperature alarm is to stop charging with

battery protection function when temperature of

battery pack unit becomes too high or too low due to

battery heat or cooling down of the battery.