- ページ 10
サーバー Fujitsu BR5450のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu BR5450 22 ページ。 Blade server systems, fibre channel connection blade
ページを印刷する5. Perform the following steps if your workstation uses Linux or UNIX.
a. Enter the following command at the command prompt:
tip /dev/ttyb - 115200
b. When the terminal application stops reporting information, press Enter to display the login prompt.
c.
Enter admin for the username and admin for the password.
6. Use the following Telnet menu options to change the IP address of the selected Embedded Switch Module.
a. Select (3) Console Redirection from the following Console Menu.
--------------------------------
Console Menu
--------------------------------
(1) Management Agent
(2) Emergency Management Port
(3) Console Redirection
(4) TFTP update
(5) Logout
(6) Reboot Management Blade
(7) System Information Dump
(8) Command Line Interface
(9) Account Management
Enter selection: 3
b. Select (1) Console Redirect Connection Blade from the following Console Redirection Table.
--------------------------------
Console Redirection Table
--------------------------------
(1) Console Redirect Connection Blade
(2) Set Return Hotkey , Ctrl+(a character) : Q
(3) Set Console Redirection Timeout
Enter selection or type (0) to quit: 1
c.
Select the location where the switch is installed from the following menu.
-------------------------------------
Console Redirect Connection Blade
-------------------------------------
(2) Console Redirect Connection Blade-2 (Selected:Backup/Restore)
(3) Console Redirect Connection Blade-3
(4) Console Redirect Connection Blade-4
(5) Console Redirect Connection Blade-5
Enter selection or type (0) to quit: 5
You should now be at the switch login prompt.
7.
Verify that you are able to login to the switch:
Login: admin
Password: password
Brocade 5450 Embedded Switch Module QuickStart Guide
Publication Number: 53-1001265-02
: 900
9 of 20