- ページ 12

サーバー Fujitsu BR5450のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu BR5450 22 ページ。 Blade server systems, fibre channel connection blade

b. Select (1) Console Redirect Connection Blade from the following Console Redirection Table.

--------------------------------

Console Redirection Table

--------------------------------

(1) Console Redirect Connection Blade

(2) Set Return Hotkey , Ctrl+(a character) : Q

(3) Set Console Redirection Timeout

Enter selection or type (0) to quit: 1

Select the location where the switch is installed from the following menu.

-------------------------------------

Console Redirect Connection Blade

-------------------------------------

(2) Console Redirect Connection Blade-2 (Selected:Backup/Restore)

(3) Console Redirect Connection Blade-3

(4) Console Redirect Connection Blade-4

(5) Console Redirect Connection Blade-5

(6) Console Redirect Connection Blade-6

Enter selection or type (0) to quit: 5

You should now be at the switch login prompt.

3. Verify that you are able to login to the switch:

Password: <default admin login password>

4. Enter the ipaddrset command to set the IP address.

5. Enter the ipaddrset command to set the IP address.

Follow the on-screen instructions and supply the correct information, as shown in the following example:

switch:admin > ipaddrset

Ethernet IP address [10.77.77.77]:10.32.53.47

Ethernet Subnetmask [255.255.255.0]:255.255.240.0

Fibre Channel IP Address [none]:

Fibre Channel Subnetmask [none]:

Gateway IP Address [0.0.0.0]: 10.32.48.1

DHCP [Off]:

IP address is being changed ... Done.

6. Enter the ipaddrshow command to verify that the IP address was correctly set.

Brocade 5450 Embedded Switch Module QuickStart Guide

Publication Number: 53-1001265-02

: 900

11 of 20