Fujitsu BR5450 빠른 시작 매뉴얼 - 페이지 12
{카테고리_이름} Fujitsu BR5450에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu BR5450 22 페이지. Blade server systems, fibre channel connection blade
b. Select (1) Console Redirect Connection Blade from the following Console Redirection Table.
--------------------------------
Console Redirection Table
--------------------------------
(1) Console Redirect Connection Blade
(2) Set Return Hotkey , Ctrl+(a character) : Q
(3) Set Console Redirection Timeout
Enter selection or type (0) to quit: 1
c.
Select the location where the switch is installed from the following menu.
-------------------------------------
Console Redirect Connection Blade
-------------------------------------
(2) Console Redirect Connection Blade-2 (Selected:Backup/Restore)
(3) Console Redirect Connection Blade-3
(4) Console Redirect Connection Blade-4
(5) Console Redirect Connection Blade-5
(6) Console Redirect Connection Blade-6
Enter selection or type (0) to quit: 5
You should now be at the switch login prompt.
3. Verify that you are able to login to the switch:
Login: admin
Password: <default admin login password>
4. Enter the ipaddrset command to set the IP address.
5. Enter the ipaddrset command to set the IP address.
Follow the on-screen instructions and supply the correct information, as shown in the following example:
switch:admin > ipaddrset
Ethernet IP address [10.77.77.77]:10.32.53.47
Ethernet Subnetmask [255.255.255.0]:255.255.240.0
Fibre Channel IP Address [none]:
Fibre Channel Subnetmask [none]:
Gateway IP Address [0.0.0.0]: 10.32.48.1
DHCP [Off]:
IP address is being changed ... Done.
6. Enter the ipaddrshow command to verify that the IP address was correctly set.
Brocade 5450 Embedded Switch Module QuickStart Guide
Publication Number: 53-1001265-02
: 900
11 of 20