- ページ 33
サーバー Fujitsu PRIMERGY B900のPDF リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu PRIMERGY B900 36 ページ。 Blade server systems, contents of the mmb s1 help system
ページを印刷する
blades.
SNMP
Basic
Enable SNMP: Enables/disables SNMP.
•
SNMP Communities: Displays the SNMP communities table.
•
New Community: Enter the community name, select the access permission and
•
click the "New" button to submit a new addition. A maximum of 5 communities
can be added to this table.
SNMP Trap Destination: Displays the SNMP trap destination table. The SNMP
•
trap destinations are the receivers to which the MMB sends the traps. The
receiver must be a member of the same community. A maximum of 5 trap
destinations can be added to this table.
New Trap Destination: Either the IP address of the trap receiver or the receiver's
•
DNS name must be entered here.
SNMP V3
V3 User Setting: Up to 10 user accounts can be configured.
•
Select User: Selects a user <n>.
o
User <n>: Enter a name for selected user <n>.
o
Permission: Selects the read/write permission.
o
Security Level: Determines the security level (Authentication, No
o
Authentication, Privacy).
Authentication Hash Method: Selects the authentication method (MD5
o
or SHA).
Authentication Password: Enter the authentication password.
o
Privacy Password: Enter the privacy password.
o
V3 Trap Destination: Displays the V3 trap destination table. The SNMP V3 trap
•
destinations are the receivers to which the MMB sends the traps.
New Trap Destination: An entry (trap destination) can be added by entering the
•
trap destination address and selecting User and Event Type. A maximum of 5
trap destinations can be added.
Alerting
Event Configuration
This function provides the event filtering configuration. If an event occurs, an alerting
email can be sent if these settings are configured.
Event Log Filter: Selection of event source and corresponding error forwarding
•
level (SEL level needs to be sent).
Server Blade Power-On/Off: Enables/disables the server blade's Power On/Off
•
Settings
33