- ページ 22

サーバー Fujitsu Primergy RX100 S3のPDF サービス補足マニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu Primergy RX100 S3 45 ページ。
Fujitsu Primergy RX100 S3 にも： スタートマニュアル (9 ページ)

ページを印刷する
Fujitsu Primergy RX100 S3 サービス補足マニュアル

Replacing the SATA backplane

4.5
Replacing the SATA backplane
You will find the SATA backplane only in the hot-plug variant.
Ê Open the server as described in the section "Preparation" on page 17.
Ê Remove all the hot-plug hard disk drives (for a description see the Operating
Manual).
V
CAUTION!
Check if all hard disk drives are uniquely identified so that you can
reinsert them into their original bays.
Ê Remove all cables from the SATA backplane.
Figure 6: Unlocking the SATA backplane
Ê Unlock the SATA backplane by pushing the green levels in direction of the
arrows.
Ê Take out the SATA backplane.
22
Service Supplement
Replacement routines
RX100 S3