- ページ 10
サーバー Fujitsu PRIMERGY RX300 S7のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu PRIMERGY RX300 S7 31 ページ。 Dual socket 2u rack server
Fujitsu PRIMERGY RX300 S7 にも： データシート (11 ページ)
ページを印刷する
C
II
Section
There are 2 processor sockets available.
The first socket must always be equipped with the first CPU which can be selected via configurator
It is also possible to upgrade a dual-processor system later on with a second CPU
Both PCIe-3 x16 slots are connected to CPU 2 and are useable with configured 2nd CPU only!
Two processors with different clock frequencies are not possible
A multi-processor operating system is required for a dual-processor system.
Max. two CPU`s can be selected per basic unit
One of following CPU´s has to be selected as first CPU
for an orderable basic unit
Optional second CPU has to be the same type like the first CPU
Basic 4C CPU's
- 1x 64-bit Intel Xeon (10MB Smart Cache)
1066 MHz DDR3 Bus; 6,40 GT/s QPI Bus and passive heat sink
occupies socket for one CPU
Xeon E5-2603 4C/4T 1.80GHz 10MB 6.40GT/s 1066MHz 80W
Xeon E5-2609 4C/4T 2.40GHz 10MB 6.40GT/s 1066MHz 80W
Standard Turbo 6C CPU's
- 1x 64-bit Intel Xeon (15MB Smart Cache); Hyper-Threading (HT);
1333 MHz DDR3 Bus; 7,20 GT/s QPI Bus and passive heat sink
occupies socket for one CPU
Xeon E5-2620 6C/12T 2.00GHz 15MB 7.20GT/s 1333MHz 95W
Xeon E5-2630 6C/12T 2.30GHz 15MB 7.20GT/s 1333MHz 95W
Xeon E5-2640 6C/12T 2.50GHz 15MB 7.20GT/s 1333MHz 95W
Advanced Turbo+ 8C CPU`s
- 1x 64-bit Intel Xeon (20MB Smart Cache); Hyper-Threading (HT);
1600 MHz DDR3 Bus; 8,00 GT/s QPI Bus and passive heat sink
occupies socket for one CPU
Xeon E5-2650 8C/16T 2.00GHz 20MB 8.00GT/s 1600MHz 95W
Xeon E5-2660 8C/16T 2.20GHz 20MB 8.00GT/s 1600MHz 95W
Xeon E5-2665 8C/16T 2.40GHz 20MB 8.00GT/s 1600MHz 115W
Xeon E5-2670 8C/16T 2.60GHz 20MB 8.00GT/s 1600MHz 115W
Xeon E5-2680 8C/16T 2.70GHz 20MB 8.00GT/s 1600MHz 130W
Xeon E5-2690 8C/16T 2.90GHz 20MB 8.00GT/s 1600MHz 135W
Frequency Optimized Turbo 2C, 4C & 6C CPU`s
- 1x 64-bit Intel Xeon (5/10/15MB Smart Cache); Hyper-Threading (HT);
1600 MHz DDR3 Bus; 6,40/7,20 GT/s QPI Bus and passive heat sink
occupies socket for one CPU
Xeon E5-2637 2C/4T 3.00GHz 5MB 6.40GT/s 1600MHz 80W
Xeon E5-2643 4C/8T 3.3GHz 10MB 6.40GT/s 1600MHz 130W
Xeon E5-2667 6C/12T 2.90GHz 15MB 7.20GT/s 1600MHz 130W
Low Power 4C/6C/8C CPU's
- 1x 64-bit Intel Xeon (15/20MB Smart Cache); Hyper-Threading (HT);
1333/1600 MHz DDR3 Bus; 7,20/8,00 GT/s QPI Bus and passive heat sink
occupies socket for one CPU
Xeon E5-2630L 6C/12T 2.00GHz 15MB 7.20GT/s 1333MHz 60W
Xeon E5-2650L 8C/16T 1.80GHz 20MB 8.00GT/s 1600MHz 70W
D
Processor
Fujitsu PRIMERGY Server
System configurator and order-information guide
PRIMERGY RX300 S7
Note: Max. DDR3 Bus Speed depends on:
- max. DDR3 Bus Speed from the CPU and
- max. DDR3 Memory Speed and
- max. memory modules on one memory channel
S26361-F3685-E180
S26361-F3685-E240
S26361-F3676-E200
S26361-F3676-E230
S26361-F3676-E250
S26361-F3686-E200
S26361-F3686-E220
On special release only
S26361-F3686-E240
S26361-F3686-E260
S26361-F3686-E270
S26361-F3686-E290
S26361-F3687-E300
S26361-F3687-E330
S26361-F3687-E290
S26361-F3688-E200
S26361-F3688-E180
Status 2013-12-30
10 of 31