Fujitsu PRIMERGY RX300 S7 Посібник - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник для Сервер Fujitsu PRIMERGY RX300 S7. Fujitsu PRIMERGY RX300 S7 31 сторінка. Dual socket 2u rack server
Також для Fujitsu PRIMERGY RX300 S7: Технічний паспорт (11 сторінок)
Друкувати сторінку
C
II
Section
There are 2 processor sockets available.
The first socket must always be equipped with the first CPU which can be selected via configurator
It is also possible to upgrade a dual-processor system later on with a second CPU
Both PCIe-3 x16 slots are connected to CPU 2 and are useable with configured 2nd CPU only!
Two processors with different clock frequencies are not possible
A multi-processor operating system is required for a dual-processor system.
Max. two CPU`s can be selected per basic unit
One of following CPU´s has to be selected as first CPU
for an orderable basic unit
Optional second CPU has to be the same type like the first CPU
Basic 4C CPU's
- 1x 64-bit Intel Xeon (10MB Smart Cache)
1066 MHz DDR3 Bus; 6,40 GT/s QPI Bus and passive heat sink
occupies socket for one CPU
Xeon E5-2603 4C/4T 1.80GHz 10MB 6.40GT/s 1066MHz 80W
Xeon E5-2609 4C/4T 2.40GHz 10MB 6.40GT/s 1066MHz 80W
Standard Turbo 6C CPU's
- 1x 64-bit Intel Xeon (15MB Smart Cache); Hyper-Threading (HT);
1333 MHz DDR3 Bus; 7,20 GT/s QPI Bus and passive heat sink
occupies socket for one CPU
Xeon E5-2620 6C/12T 2.00GHz 15MB 7.20GT/s 1333MHz 95W
Xeon E5-2630 6C/12T 2.30GHz 15MB 7.20GT/s 1333MHz 95W
Xeon E5-2640 6C/12T 2.50GHz 15MB 7.20GT/s 1333MHz 95W
Advanced Turbo+ 8C CPU`s
- 1x 64-bit Intel Xeon (20MB Smart Cache); Hyper-Threading (HT);
1600 MHz DDR3 Bus; 8,00 GT/s QPI Bus and passive heat sink
occupies socket for one CPU
Xeon E5-2650 8C/16T 2.00GHz 20MB 8.00GT/s 1600MHz 95W
Xeon E5-2660 8C/16T 2.20GHz 20MB 8.00GT/s 1600MHz 95W
Xeon E5-2665 8C/16T 2.40GHz 20MB 8.00GT/s 1600MHz 115W
Xeon E5-2670 8C/16T 2.60GHz 20MB 8.00GT/s 1600MHz 115W
Xeon E5-2680 8C/16T 2.70GHz 20MB 8.00GT/s 1600MHz 130W
Xeon E5-2690 8C/16T 2.90GHz 20MB 8.00GT/s 1600MHz 135W
Frequency Optimized Turbo 2C, 4C & 6C CPU`s
- 1x 64-bit Intel Xeon (5/10/15MB Smart Cache); Hyper-Threading (HT);
1600 MHz DDR3 Bus; 6,40/7,20 GT/s QPI Bus and passive heat sink
occupies socket for one CPU
Xeon E5-2637 2C/4T 3.00GHz 5MB 6.40GT/s 1600MHz 80W
Xeon E5-2643 4C/8T 3.3GHz 10MB 6.40GT/s 1600MHz 130W
Xeon E5-2667 6C/12T 2.90GHz 15MB 7.20GT/s 1600MHz 130W
Low Power 4C/6C/8C CPU's
- 1x 64-bit Intel Xeon (15/20MB Smart Cache); Hyper-Threading (HT);
1333/1600 MHz DDR3 Bus; 7,20/8,00 GT/s QPI Bus and passive heat sink
occupies socket for one CPU
Xeon E5-2630L 6C/12T 2.00GHz 15MB 7.20GT/s 1333MHz 60W
Xeon E5-2650L 8C/16T 1.80GHz 20MB 8.00GT/s 1600MHz 70W
D
Processor
Fujitsu PRIMERGY Server
System configurator and order-information guide
PRIMERGY RX300 S7
Note: Max. DDR3 Bus Speed depends on:
- max. DDR3 Bus Speed from the CPU and
- max. DDR3 Memory Speed and
- max. memory modules on one memory channel
S26361-F3685-E180
S26361-F3685-E240
S26361-F3676-E200
S26361-F3676-E230
S26361-F3676-E250
S26361-F3686-E200
S26361-F3686-E220
On special release only
S26361-F3686-E240
S26361-F3686-E260
S26361-F3686-E270
S26361-F3686-E290
S26361-F3687-E300
S26361-F3687-E330
S26361-F3687-E290
S26361-F3688-E200
S26361-F3688-E180
Status 2013-12-30
10 of 31