- ページ 14

スキャナー Fujitsu ScanPartner 620CのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu ScanPartner 620C 28 ページ。 Image scanner
Fujitsu ScanPartner 620C にも： 仕様 (2 ページ), 消耗品の交換とクリーニング (7 ページ), インストール手順 (5 ページ)

ページを印刷する
Fujitsu ScanPartner 620C ユーザーマニュアル

2.7 CONNECTING THE CABLE

i).
Turning the Power Off
Depress the side marked " O" to turn the power off.
Connect the power cable and SCSI signal cable as shown in Figure 2-8 and Figure 2-9.
ii).
Turning the Power On
Depress the side marked " I" to turn the power on. The POWER LED will light. If not, please check
the power source.
iii).
SCSI Termination
The Fujitsu ScanPartner 620C comes complete with a built-in SCSI terminator. If the Scanner is
the last device in a SCSI chain, the Terminator should be switched ON. If the scanner is not the
last device, the Terminator should be OFF. The Terminator ON/OFF switch is located on the
back of the scanner, to the left of the SCSI cable connectors.
Host PC
Term.
Host PC
Term.
Scanner
(Terminator Off)
Scanner
(Terminator On)
2-10
SCSI Device
Term.