Fujitsu ScanPartner 620C 사용자 설명서 - 페이지 14

{카테고리_이름} Fujitsu ScanPartner 620C에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ScanPartner 620C 28 페이지. Image scanner
Fujitsu ScanPartner 620C에 대해서도 마찬가지입니다: 사양 (2 페이지), 소모품 교체 및 청소 지침 (7 페이지), 설치 절차 (5 페이지)

페이지 인쇄
Fujitsu ScanPartner 620C 사용자 설명서

2.7 CONNECTING THE CABLE

i).
Turning the Power Off
Depress the side marked " O" to turn the power off.
Connect the power cable and SCSI signal cable as shown in Figure 2-8 and Figure 2-9.
ii).
Turning the Power On
Depress the side marked " I" to turn the power on. The POWER LED will light. If not, please check
the power source.
iii).
SCSI Termination
The Fujitsu ScanPartner 620C comes complete with a built-in SCSI terminator. If the Scanner is
the last device in a SCSI chain, the Terminator should be switched ON. If the scanner is not the
last device, the Terminator should be OFF. The Terminator ON/OFF switch is located on the
back of the scanner, to the left of the SCSI cable connectors.
Host PC
Term.
Host PC
Term.
Scanner
(Terminator Off)
Scanner
(Terminator On)
2-10
SCSI Device
Term.