- ページ 2

プリントサーバー Brother HL-1870NのPDF ドライバーインストールマニュアルをオンラインで閲覧またはダウンロードできます。Brother HL-1870N 2 ページ。 Brother imprimante laser - guide de configuration rapide (french)
Brother HL-1870N にも： パンフレット＆スペック (6 ページ), クイック・セットアップ・マニュアル (2 ページ), ドライバーインストールマニュアル (2 ページ), パーツリスト (27 ページ), 交換手順 (4 ページ), (フランス語) 迅速設置ガイド (2 ページ)

ページを印刷する
Brother HL-1870N ドライバーインストールマニュアル
Driver Installation Guide
®
Windows

For Network Users

For HL-1850 users: If you are going to connect the printer to your network, purchase the optional
Network board (NC-4100h).
Before you continue, please ensure that the administrator has configured the network printer
settings correctly referring to the Network Quick Setup Guide.
Follow the instructions in this guide for your network type and operating system.
Some illustrations are based on the HL-1870N.
Steps 1 to 4 Follow these steps in the Quick Setup
Guide first.
For All Network Users
Step 5 Connect the Printer to Your Network
& Install the Driver
1
2
Click "Connect the interface cable &
Select the Network interface
Install the driver/utility."
cable.
Hub
O
I
OFF ON
4
5
Connect the network interface cable to
Turn on the printer power switch.
the printer, and then connect it to a free
port on your hub.
7
8
Follow the instructions on the screen.
Select "Network Shared Printer" or "Brother Peer-to-Peer
Network Printer," and then click the Next button.
Go to Step 6.
*
1 Follow the instructions for the appropriate network connection style and your operating system.
Network Shared Printer
For
Users
Step 6 Select the Appropriate Printer Queue or
'Sharename'
1
2
Select your printer's queue, and then click the
When the appropriate queue is specified, the printer driver
OK button.
will be installed.
For Brother
Step 6 Configuring the LPR Port
For Windows
1
For Windows NT
1
O
I
For Windows
OFF ON
3
Turn off the printer power switch.
1
6
Click the Install button.
5
For Windows
*
1
1
For Brother
Step 6 Configuring the NetBIOS Port
The setup is now complete.
1
Peer-to-Peer
Network Printer Users
®
95/98/Me Users Only
2
Select "LPR (Recommended),"
Enter your unique port name (ex.
and then click the Next button.
BLP1), and then click the OK button.
®
4.0 Users Only
Select "LPR (Recommended),"
Note: If this screen appears, insert the
®
and then click the Next button.
Windows NT
4.0 CD-ROM into your CD-ROM
drive.
®
2000 Users Only
2
Select "LPR (Recommended)," and then
Click the Next button.
click the Next button.
6
After your PC has restarted, click
Select the Brother HL-1850 or Brother HL-1870N icon.
Start, Settings and Printers.
From the File menu, select Properties to open the driver properties.
®
XP Users Only
2
3
Select "LPR
Click the Next button.
(Recommended)," and
then click the Next button.
Peer-to-Peer
Network Printer Users
2
Select "NetBIOS," and then click
Enter your unique port name (ex. BNT1),
the Next button.
and then click the OK button.
(LPR
- Recommended Peer-to-Peer Printing Method
3
Specify your printer's IP Address (or click the Browse button
to see a list of printers), and then click the OK button.
2
Enter your printer's IP Address and the queue
name BINARY_P1, and then click the OK button.
3
Enter your printer's IP Address and your unique port
name, and then click the Next button.
7
Click the Configure Port...
button in the Ports tab.
4
Enter your printer's IP Address and
Click the Finish button.
your unique port name, and then click
the Next button.
(NetBIOS)
3
Enter the path name (or click the Browse... button to
see a list of printers), and then click the OK button.
)
4
Click the Finish button to restart your PC.
After your PC has restarted, setup will be complete.
3
Click the Finish button to restart your PC.
After your PC has restarted, setup will be complete.
4
Click the Finish button, and then click the OK button.
Click the Finish button again to restart your PC.
The setup is now
complete.
8
Select "LPR" on protocol, and then click the OK button.
Close the driver properties.
5
Click the OK button.
Click the Finish button to restart your PC.
After your PC has restarted, setup will be complete.
4
Click the Finish button to restart your PC.
After your PC has restarted, setup will be complete.