- ページ 17

ストレージ Fujitsu eternus afのPDF 設定マニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu eternus af 28 ページ。 Fibre channel for citrix xenserver
Fujitsu eternus af にも：設定マニュアル (25 ページ), 設定マニュアル (32 ページ), 設定マニュアル (43 ページ)

ページを印刷する

Chapter 7

Installing the iSCSI Software Initiator and Setting Up the Server

7.2

Setting Up the Server

*1: Recommended value = 1024 ¸ (number of iSCSI ports that are connected to a single CA port) ¸

number of LUNs

(Round the result down)

•

Use the value of "8" if the actual result is lower.

•

To achieve maximum system performance, these values can be changed according to the server

load and the peak operating times.

The number of simultaneous command executions per CA port for the ETERNUS DX/AF is limited

•

to 1024. These values are used by multiple servers that share the CA port. A maximum of 1024

commands can be executed per CA port.

The parameter to be specified is determined by the CPU which is installed in the server to be connected.

For SPARC

•

Specify the command queue depth for the "ssd_max_throttle" parameter.

Add this parameter if it does not exist.

Example:

set ssd:ssd_max_throttle = 20

For x86

•

Specify the command queue depth for the "sd_max_throttle" parameter.

Add this parameter if it does not exist.

Example:

set sd:sd_max_throttle = 20

After editing the configuration file, save it.

After the setting is complete, check the configuration file for incorrect settings.

Reboot the server.

# /usr/sbin/shutdown -y -g0 -i6

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (iSCSI) for Oracle Solaris

P3AM-4042-18ENZ0