Fujitsu eternus af Podręcznik konfiguracji - Strona 17
Przeglądaj online lub pobierz pdf Podręcznik konfiguracji dla Przechowywanie Fujitsu eternus af. Fujitsu eternus af 28 stron. Fibre channel for citrix xenserver
Również dla Fujitsu eternus af: Podręcznik konfiguracji (25 strony), Podręcznik konfiguracji (32 strony), Podręcznik konfiguracji (43 strony)
![Fujitsu eternus af Podręcznik konfiguracji](/uploads/products/server2/2442740/2442740.jpg)
Chapter 7
Installing the iSCSI Software Initiator and Setting Up the Server
7.2
Setting Up the Server
*1: Recommended value = 1024 ¸ (number of iSCSI ports that are connected to a single CA port) ¸
number of LUNs
(Round the result down)
•
Use the value of "8" if the actual result is lower.
•
To achieve maximum system performance, these values can be changed according to the server
load and the peak operating times.
The number of simultaneous command executions per CA port for the ETERNUS DX/AF is limited
•
to 1024. These values are used by multiple servers that share the CA port. A maximum of 1024
commands can be executed per CA port.
The parameter to be specified is determined by the CPU which is installed in the server to be connected.
For SPARC
•
Specify the command queue depth for the "ssd_max_throttle" parameter.
Add this parameter if it does not exist.
Example:
set ssd:ssd_max_throttle = 20
For x86
•
Specify the command queue depth for the "sd_max_throttle" parameter.
Add this parameter if it does not exist.
Example:
set sd:sd_max_throttle = 20
2
After editing the configuration file, save it.
3
After the setting is complete, check the configuration file for incorrect settings.
4
Reboot the server.
# /usr/sbin/shutdown -y -g0 -i6
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (iSCSI) for Oracle Solaris
17
Copyright 2017 FUJITSU LIMITED
P3AM-4042-18ENZ0