- ページ 14

ストレージ Fujitsu ETERNUS AF SeriesのPDF 設定マニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu ETERNUS AF Series 16 ページ。 Hybrid storage systems, all-flash arrays, power synchronized unit
Fujitsu ETERNUS AF Series にも：設定マニュアル (38 ページ), 安全上のご注意 (12 ページ)

ページを印刷する

Chapter 2

Setting Up the ETERNUS DX/AF

2.3

Checking the WWNs

2.2.2

Setting the Subsystem Parameters

2.2.2.1

Load Balance (for HP-UX Only)

For HP-UX connection, select "Disable" for "Load Balance" in the "Setup Subsystem Parameters" function. This

prevents sense responses that require access retries from being issued when the ETERNUS DX/AF is overloa-

ded.

For HP-UX server, improper logs may be recorded unless sense response is restricted. Therefore, "Load Bal-

ance" should be disabled. (Sense response should be restricted.)

Note that changing the "Load Balance" setting has no affect on non-HP-UX servers.

2.2.2.2

Reject INQUIRY from Unauthorized Host

Select "Enable" only when the Veritas Volume Manager Dynamic Multipathing (VxVM DMP) function is used.

2.3

Checking the WWNs

Use ETERNUS Web GUI to check the WWN of each ETERNUS DX/AF. They are required for connecting the ETER-

NUS DX/AF to the server.

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-

P3AM-7962-15ENZ0