Fujitsu ETERNUS AF Series 구성 매뉴얼 - 페이지 14
{카테고리_이름} Fujitsu ETERNUS AF Series에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ETERNUS AF Series 16 페이지. Hybrid storage systems, all-flash arrays, power synchronized unit
Fujitsu ETERNUS AF Series에 대해서도 마찬가지입니다: 구성 매뉴얼 (38 페이지), 안전 주의사항 (12 페이지)
![Fujitsu ETERNUS AF Series 구성 매뉴얼](/uploads/products/server2/2442789/2442789.jpg)
Chapter 2
Setting Up the ETERNUS DX/AF
2.3
Checking the WWNs
2.2.2
Setting the Subsystem Parameters
2.2.2.1
Load Balance (for HP-UX Only)
For HP-UX connection, select "Disable" for "Load Balance" in the "Setup Subsystem Parameters" function. This
prevents sense responses that require access retries from being issued when the ETERNUS DX/AF is overloa-
ded.
For HP-UX server, improper logs may be recorded unless sense response is restricted. Therefore, "Load Bal-
ance" should be disabled. (Sense response should be restricted.)
Note that changing the "Load Balance" setting has no affect on non-HP-UX servers.
2.2.2.2
Reject INQUIRY from Unauthorized Host
Select "Enable" only when the Veritas Volume Manager Dynamic Multipathing (VxVM DMP) function is used.
2.3
Checking the WWNs
Use ETERNUS Web GUI to check the WWN of each ETERNUS DX/AF. They are required for connecting the ETER-
NUS DX/AF to the server.
14
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-
Copyright 2017 FUJITSU LIMITED
P3AM-7962-15ENZ0