- ページ 2

ストレージ Fujitsu ETERNUS AF250のPDF セットアップマニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu ETERNUS AF250 12 ページ。 Hybrid storage systems, all-flash arrays, power synchronized unit
Fujitsu ETERNUS AF250 にも：設定マニュアル (18 ページ), 安全上のご注意 (12 ページ), サイト・プランニング・マニュアル (38 ページ)

ページを印刷する

Installation in a Rack

STEP

The rack rail needs to be attached to the rack and the controller enclosure or the drive enclosure needs to be

installed.

Configuration Guide (Basic)

The center of gravity must be taken into consideration to prevent a rack from toppling over. The controller

IMPORTANT

enclosure and drive enclosures should generally be installed from bottom to top to lower the center of gravity

and to ensure the safe use of racks.

Attach the rack rails to the rack.

The size of the controller enclosure and each drive enclosure is 2U.

Plate

M5 screws

(Front rack pillars)

Install and fasten the controller enclosure or the drive enclosure in the rack.

●

To fasten the controller enclosure

Use three M5 screws to fasten the controller enclosure to the rack pillars and attach the flange cover.

M5 screws

Flange cover

Rack rail (for left side)

Washers

Plate

M5 screws

Rack rail (for right side)

M5 screws

Flange cover

FUJITSU Storage ETERNUS AF250 All-Flash Arrays Setup Guide

(Rear rack pillars)

M5 screws

Washers

P3AG-1862-02ENZ0