- ページ 10

ストレージ Fujitsu ETERNUS DX200 S3のPDF 設定マニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu ETERNUS DX200 S3 13 ページ。 Hybrid storage systems, all-flash arrays, power synchronized unit
Fujitsu ETERNUS DX200 S3 にも：設定マニュアルサーバー接続 (12 ページ), 設定マニュアルサーバー接続 (12 ページ), 設定マニュアル (28 ページ), 設定マニュアル (18 ページ), セットアップマニュアル (15 ページ), 安全上のご注意 (12 ページ)

ページを印刷する

Chapter 2

Setting Up the ETERNUS DX

2.1

Common Settings

2.1.3

Setting the Host Responses

The host response parameters for the ETERNUS DX must be set to match the way the server processes the

responses to requests from the ETERNUS DX. Setting of the host response must be done before connecting

the ETERNUS DX to the server.

Set the parameters that are described below for each OS.

Retain the default values for all of the parameters that are not described below.

When setting the access path using the ETERNUS SF Storage Cruiser, the host responses for FC host will be

set to default values. Set the host response after setting the access path using the ETERNUS SF Storage

Cruiser.

Table 2.5 Host response settings

Solaris (*1)

Windows

Linux

VMware ESX

Citrix XenServer

Oracle VM Server for x86

HP-UX

AIX

IBM SVC

*1: An Oracle-brand Fibre Channel card driver may be used for Fujitsu Fibre Channel cards.

To confirm which driver should be used, check the "Notes" and "Fibre Channel Cards that Require an Ora-

cle-brand Driver" sections in "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fi-

bre Channel) for Oracle Solaris".

2.1.4

Setting the CA Port Groups

Create new FC port groups and register the ports as members of the groups. A port group is a group of ports

that access the same LUN group (ports that are used for multipath connection to the server or for connecting

to the cluster configuring server). Configure the host affinity setting for each FC port group.

2.1.5

Registering the WWNs of the Accessing Fibre Channel Cards (Setting FC Host)

same time, set the host response numbers registered in

cept these WWNs.

Registering the FC host WWNs and setting up Host Affinities as described elsewhere, allows limits to be set

on which servers are allowed to access which ETERNUS DX LUNs.

Conditions

When using the OS standard Multipath Driver

(MPxIO)

Other cases

–

When using Symantec Storage Foundation

Other cases

–

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-

Host response selection

Solaris MPxIO

Default

HP-UX

AIX VxVM

AIX

SVC

"2.1.3 Setting the Host Responses" (page 10)

to ac-

P3AM-7962-08ENZ0