- ページ 8

ストレージ Fujitsu ETERNUS DX200 S3のPDF 設定マニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu ETERNUS DX200 S3 13 ページ。 Hybrid storage systems, all-flash arrays, power synchronized unit
Fujitsu ETERNUS DX200 S3 にも：設定マニュアルサーバー接続 (12 ページ), 設定マニュアルサーバー接続 (12 ページ), 設定マニュアル (28 ページ), 設定マニュアル (18 ページ), セットアップマニュアル (15 ページ), 安全上のご注意 (12 ページ)

ページを印刷する

Chapter 2

Setting Up the ETERNUS DX

2.1

Common Settings

This section explains the settings required for all server OSs, regardless of the connection configuration.

See the "ETERNUS Web GUI User's Guide" for details of how to set up and operate ETERNUS Web GUI.

2.1.1

Setting the To-Server Connection Type (Setting the FC Port Parameters)

For each connection configuration, set the indicated items only. All other parameters should be left on their

default values.

Specify "Fabric connection" for connections to the Fibre Channel switches.

•

Specify "FC-AL connection" for direct connections to the Fibre Channel cards. Specify "Fabric connection" for

•

direct connections to 16Gbit/s Fibre Channel cards (maximum transfer rate) with a transfer rate of 16Gbit/s.

Table 2.1 FC port parameter settings (FC-AL connection)

Parameter

Connection

Set Loop ID

Loop ID

Transfer Rate

Frame Size

Reset Scope

Release Reservation if Chip is Reset

*1: Set the appropriate value from the following table. Do not use [Auto-negotiation].

Table 2.2 Transfer Rate setting values (for FC-AL connection)

Fibre Channel card maximum speed

16Gbit/s

8Gbit/s

4Gbit/s

Table 2.3 FC port parameter settings (Fabric connection)

Parameter

Connection

Solaris OS

FC-AL

Manual

Values from 0x10 upwards

(Except 0x7D)

See the table below (*1)

2048

I_T_L

Disable

Transfer rate setting value

16Gbit/s CA

—

8Gbit/s

4Gbit/s

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-

HP-UX, AIX, Windows

ESX, PAN Manager, Citrix XenServer,

Oracle Linux, Oracle VM Server for x86

0x00

8Gbit/s CA

8Gbit/s

4Gbit/s

Setting value

Fabric

, Linux, VMware

P3AM-7962-08ENZ0